It is the mechanism whereby a house or property is restored to its pre-loss state. Property damage could be due to an incident of flooding, flood or other water damage. The water damage restoration process includes many primary procedures such as loss assessment, water contamination level categorization, decontamination and drying of the system, process monitoring, and process completion. There are two major certifying bodies, namely the IICRC (Institute of Certification for Inspection, Cleaning and Restoration) and the RIA (Restoration Industry Association), which prescribe water damage restoration requirements. The damage caused by the S500 water guide is the benchmark tool used by companies that specialize in water damage reconstruction. The CleanUP Guys
Evaluation of Loss Assessment and Categorization Loss is the first and most important step in restoreing water damage. The assessment must be accurate, so that a reasonable answer can be taken. Technicians and insurance companies will work together to repair the damage caused by water and consider what is damaged and how to fix the damage. Identifying the cause of the damage, recording the damage and reliable estimates are necessary for proper repair of the water damage. Categorisation is based on water source pollution levels.
1-This is water from clean sources such as tanks, sinks and toilets without faeces or urine.
2-This is water which contains other pollutants, such as water from a dishwasher, washing machine or urine toilet.
3-This is particularly unsanitary water that can cause illness or death if swallowed. A few examples include sewage water, toilet water with faeces, standing water with microbial growth and floodwater.
Decontamination and Drying The drying and decontamination process begins at the site after the evaluation is complete. The damage caused by water can be divided into 4 forms depending on the extent of the damage. Class 1 Harm-Materials have absorbed less water when loss is limited to a small area. This leads to a slow rate of evaporation. Class 2 Damage-Damage to the whole room and carpet area if the damage. Class 3 Damage-When the whole region is saturated with water and
4 Damage-if there are many pockets of extreme saturation. Decontamination and drying is a crucial stage in restore water damage and the use of equipment such as blowers, dehumidifiers, scrubbers and equipment for subfloor drying. When contamination has been identified in the field, decontamination must be performed. Decontamination can be performed throughout the region or in specific areas where pollution has been found.
Control and completion Monitoring is crucial to achieving the desired outcomes in the restoration process of damage caused by damage. During monitoring phase one has to be attentive. Ensuring the proper set-up of the drying equipment, determining whether the personnel involved are qualified for the job and ensuring whether the equipment is in working order are all part of the monitoring process. If anything unusual is noticed during the screening process, necessary steps are to be taken. The whole cycle of repairing water damage would only be graded as complete once the humidity, temperature and moisture content are as per industry standards. The drying equipment may be removed after the water damage repair process is complete.